|
|
AMTECH
is a distributor for Kyzen, the leading supplier of environmentally
responsible cleaning solutions for high-reliability manufacturers
of microelectronics, optics, semiconductor and metal substrates.
Kyzen offers aqueous, semi aqueous and vapor phase technology
for use in all commonly used cleaning systems. Kyzen products
are also ideal for wafer level packaging flux and resist strip
applications. For more information on Kyzen cleaning chemistries,
go to www.kyzen.com
|
|
|
| Saponifiers* |
Applications |
Mix
Ratio |
Temp. |
|
Aquanox XJN-Plus
Data
Sheet (PDF)
MSDS
(PDF)
|
XJN-Plus is
a water mixable concentrated electronic cleaning solvent designed
for use in aqueous inline spray machines. XJN-Plus removes
rosin-based flux, no-clean flux residues, mis-printed solder
paste, and assembly residues from surface mount and through
hole printed wire assemblies. |
10
– 30% |
120
– 160°F |
|
Aquanox A4512
Data
Sheet (PDF)
MSDS
(PDF)
|
The A4512
is a concentrated cleaning solvent designed for use in aqueous
batch or in-line spray machines. This product is used to remove
rosin-based flux, tacky flux, uncured adhesive, mis-printed
solder paste, and assembly residues from surface mount and
through hole printed wire assemblies. The A4512 can also be
used to clean stencils at 5-8% concentration. |
5 –
20% |
120.
– 160°F |
|
Aquanox A4520
Data
Sheet (PDF)
MSDS
(PDF)
|
Aquanox A4520
is specially designed for optimum effectiveness with reflowed
pastes, tacky fluxes, uncured adhesives, rosin flux, no clean
flux and lead-free flux. A4520 can be diluted with water as
required, or applied full strength for more challenging cleaning
situations. |
5 –
30% |
amb–
160°F |
|
Aquanox A4630
Data
Sheet (PDF)
MSDS
(PDF)
|
Aquanox A4630
is specially designed for cleaning lead-free materials. A4630
is MEA-free, and can be used at ambient temperatures without
the use of sump side additives to remove lead-free flux, tacky
flux, SMT additives, reflowed paste, no clean flux and RMA
flux. Typically used at 10 – 20% concentration. |
10–
25% |
amb–
160°F |
|
*Concentrated organic
aqueous solvents
|
| Cleaning |
Product
Description |
Mix
Ratio |
Temp. |
|
I3400
Data
Sheet (PDF)
MSDS
(PDF)
|
The I3400
is formulated to effectively remove flux and paste in automated
screen printers. It can be used in under stencil wipe systems
or manually. |
Full |
Ambient |
|
Lonox L5611
Data
Sheet (PDF)
MSDS
(PDF)
|
Kyzen’s
LONOX L5611 is an aqueous blend cleaning chemistry designed
for optimum effectiveness in removing flux, solder paste and
uncured adhesives from stencils and misprints. Easy-to-use
L5611 is normally diluted with water at ambient temperature
to provide an effective and economical cleaning solution.
LONOX L5611 is compatible with most standard stencil cleaning
equipment and can be used in immersion, spray-in-air, and
ultrasonic systems. |
Variable |
Ambient |
|
Cybersolv C8502
Data
Sheet (PDF)
MSDS
(PDF)
|
Kyzen’s
Cybersolv C8502 is specially formulated to quickly remove
all types of flux residues from wave solder fingers, reflow
oven surfaces, and general electronics production equipment.
Even hard to remove lead-free materials are no challenge for
this environmentally-friendly chemistry. Cybersolv C8502 is
a non-flammable alternative to IPA while maintaining low VOC’s
and virtually no odor. |
Full |
Ambient |
|
Cybersolv 141-R
Data
Sheet (PDF)
MSDS
(PDF)
|
Kyzen’s
Cybersolv 141-R is a precision cleaner blend of organic solvents
designed for optimum effectiveness in electronic assembly
and maintenance cleaning applications including flux, paste,
inks, uncured adhesives, waxes, mill markings, greases, oils,
finger prints, etc. Use Cybersolv 141-R as a replacement for
HFC 141B precision cleaning applications. Also safe and effective
for use in bench-top electronics cleaning. |
N/A |
N/A |
| Defoamer |
Product
Description |
Mix
Ratio |
Temp. |
|
DF10
Data
Sheet (PDF)
MSDS
(PDF) |
DF10 is a
water-based de-foamer designed to eliminate the formation
of air bubbles, thereby controlling the formation of foam
on the surface of a wash bath. |
N/A |
N/A |
|
|
